Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
HYDRAULIC SYSTEM
(3) Mower Lift Linkage
Mower Lift Linkage
After reassembling the mower lift linkage, be sure to adjust it as
follows.
1. Check the lift arm free play.
2. Loosen the adjusting nut (1) and start the engine.
3. Move the hydraulic control lever to Lift position until the relief
valve operating.
(Uppermost position)
4. Adjusting bolt (2) until the clearance between stopper and mower
rear
link
LH gets ato 0.5 mm (0 to 0.019 in.)
5. Secure the lock nut (1).
oto 0.5 mm
Clearance
L2
Factory spec.
oto 0.019 in.
(Reference)
ILength L1
IFactory spec.
I 17mm
0.669 In.
(1) Nut
(A) Upper View
(2) Bolt
L1 :Length
L2 :Clearance
W54698712
5-86