Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, lA240, BT601, WSM
HYDRAULIC SYSTEM
Lever Grips and Fender
1. Disconnect the electric outlet connector (6).
2. Remove the lowering speed adjusting knob (5) and cutting height
adjusting dial knob (4).
3. Remove the lever grips (2).
4. Remove the fender (1) with lever guide (3).
(1) Fender
(4) Cutting Height Adjusting
Dial Knob
(2) Lever Grip
(5) Lowering Speed Adjusting Knob
(3) Lever Guide
(6) Electric Outlet
W1014865
Fuel Tank
1. Drain the fuel.
2. Disconnect the lead wire from fuel level sensor and fuel hoses
from the fuel tank (1).
3. Remove the fuel tank stays (2). (3) and cushions. then remove
the fuel tank (1).
4. Remove the PTO cover (4).
(When reassembling)
Tightening torque
Fuel tank stay mounting
bolt and nut
48.1 to 55.9 N'm
4.9 to 5.7 kgf·m
35.4 to 41.2 ft-Ibs
(1) Fuel
Tank
(3) Fuel Tank Stay RH
(2) Fuel Tank Stay
LH
(4) PTO Cover
W1027629
Fender Center Stay
1. Remove the fender bracket (2).
2. Remove the fender center stay (1).
(When reassembling)
Tightening torque
Fender bracket mounting
bolt
124 to 147 N'm
12.6 to 15.0 kgf·m
91.2 to 108 ft-Ibs
(1) Fender Center Stay
(2) Fender Bracket
W1027820
5-S8