Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
HYDRAULIC SYSTEM
(2) Separating Hydraulic Pump
Hydraulic Cylinder Block
1. Disconnect the mower linkage (1).
2. Remove the wireharness clamp and wireharness (3) move to the
front side.
3. Remove the connecting bar (2).
4. Remove the hydraulic cylinder block mounting bolt.
5. Remove the hydraulic cylinder block (4).
(When reassembling)
Tightening torque
Hydraulic cylinder block
mounting bolt
39.2 to 44.1 N'm
4.0
to 4.5 kgf·m
28.9 to 32.5 ft-Ibs
(1) Mower Linkage
(3) Wirehamess
(2) Connecting
Bar
(4) Hydraulic Cylinder Block
W1028149
Battery
A CAUTION
• When disconnecting the battery cables, disconnect the
negative cable from the battery first. When connecting,
connect the positive cable to the battery first.
1. Remove the under panel (1).
2. Disconnect the negative cable (2) from the battery.
(1) Under Panel
(3) Negative Cable
(2) Battery
W1028561
5-89