Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
HYDRAULIC SYSTEM
Fender Center Stay
1. Remove the fender bracket (2).
2. Remove the fender center stay (1).
(When reassembling)
Tightening torque
Fender bracket mounting
bolt
124 to 147 N'm
12.6 to 15.0
kgf·m
91.2 to 108 ft-Ibs
(1) Fender Center Stay
(2) Fender Bracket
W1020490
Hydraulic Cylinder Block
1. Disconnect the rear lift link LH (1).
2. Remove the wireharness clamp and move the wireharness (3)
forward.
3. Remove the connecting bar (2).
4. Remove the hydraulic cylinder block mounting bolt.
5. Remove the hydraulic cylinder block (4).
Tightening torque
Hydraulic cylinder block
mounting bolt
39.2 to
44.1 N'm
4.0 to 4.5 kgf·m
28.9 to 32.5 ft-Ibs
(1) Rear
lift link
(3) Wireharness
(2) Connecting Bar (4) Hydraulic Cylinder Block
W1020624
5-511