Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
ELECTRICAL SYSTEM
(12) Combination Switch
3TAAAAF9P030A
Combination Switch
1. Remove the meter panel, and disconnect the combination switch
connector.
2. Remove the combination switch (1) and perform the following
checks 1) to 8).
(1) Combination Switch (6) Yellow Lead
(2) Red
I Yellow Lead
(7) Orange Lead
(3) Green Lead
(8) Red
I White Lead
(4) Black
I Blue Lead
(9) Green
I White Lead
(5) Blue
I White Lead
W1049462
1) Connector Voltage
1. Connect the combination switch connector to the main wire
harness.
2. Measure the voltage with a voltmeter across the connector
B1
terminal and chassis when the main switch is ON position.
3. If the voltage differs from the battery voltage, the wiring harness
and main switch is faulty.
Main switch at
B1 terminal -
Battery voltage
"ON" position Chassis
W1050272
2) Head Light Switch Continuity when Setting Switch at "OFF"
Position
1. Set the light switch to the OFF position.
2. Measure the resistance with an ohmmeter across the red I yellow
lead (1)
to the orange lead (4). the red I yellow lead (1) to the
yellow lead (3).
3. If infinity is not indicated, the head light switch is faulty.
Resistance
Red
I Yellow lead (1 ) -
Orange lead (4)
Infinity
(Switch
at OFF position)
Red
I Yellow lead (1)
Yellow lead (3)
(1) Red
I Yellow Lead
A: Head Light "OFF" Position
(2) Blue
I White Lead
(3) Yellow Lead
(4) Orange Lead
(5) Red
I White Lead
W1050981
6-S18