Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
ELECTRICAL SYSTEM
3TAAAAF9P027C
3TAAAAF9P027D
3) Head Light Switch Continuity when Setting Switch at "ON"
Position
1. Set the light switch to the ON position.
2. Measure the resistance with an ohmmeter across the red I yellow
lead
(1 ) to the orange lead (4) and the red I yellow lead (1) to the
yellow lead (3).
3. If infinity is not indicated, the head light switch is faulty.
Red' Yellow lead (1)-
Resistance
(Switch at
ON position)
Orange lead (4)
Red' Yellow lead (1) -
on
Yellow lead (3)
(1) Red
'Yellow Lead
A: Head Light "OFF" Position
(2) Blue I White Lead
(3) Yellow Lead
(4) Orange Lead
(5)
Red' White Lead
W1051881
4) Turn Signal Light Switch Continuity when Setting Switch
Knob "OFF" Position
1. Set the tum signal switch knob to the OFF position.
2. Measure the resistance with an ohmmeter across the green lead
(1) and red
I white lead (2), and across to the green lead (1) and
green
I white lead (3).
3. If infinity is not indicated, the combination switch is faulty.
Green lead (1) - Red'
Resistance
White lead (4)
(Switch knob at OFF
on
position)
Green lead (1)
Green
I White lead (3)
(1) Green Lead
A: Turn Signal Light Switch "OFF"
(2) Red I White Lead
Position
(3)
Green' White Lead
W1052305
6-S19