Operation Manual
BX25. RCK54(P)-23BX. RCK60B-23BX. LA240, BT601.
WSM
ELECTRICAL SYSTEM
(1)~
3TMABAB9P037 A
Charge Lamp (Charging Circuit)
1.
Disconnect the
3P
connector from the alternator after turning the
main switch OFF.
2.
Tum the main switch
ON
and connect a jumper lead from the
wiring harness connector terminal (White
I Red) to the chassis .
• NOTE
•
If
you connect
the
jumper
lead
from
the
wiring
harness
connector terminal (White
I Red)
to
the chassis, 15A fuse
will
be blown. Do
not
connect
the
lead
to
Red I Yellow terminal.
3.
If the charge lamp does not light, the wiring harness or fuse is
faulty.
(1) Alternator
A:
To Main Switch
(2)
3P Connector B :
To
Hour
Meter and Tachometer
(3)
Sb (Sky Blue) Terminal
C : To Change Lamp
(4) RY (Red / Yellow) Terminal
0:
To
Ground
(5)
WR
(White / Red) Terminal
W10456321
Engine Oil Pressure Lamp
1.
Disconnect the lead (2) from the engine oil pressure switch (1)
after turning the main switch OFF.
2.
Tum the main switch
ON
and connect a jumper lead from the
lead to the chassis.
3.
If the engine oil pressure indicator lamp does not light, the wiring
harness is faulty.
(1) Engine Oil Pressure Switch (a) From Oil Pressure Lamp
(2) Lead
W10325487
6-523