Operation Manual
BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
ROTARY MOWER
(2) Check Point
of
Initial
50
Hours
Changing Gear
Box
Oil
A CAUTION
• Be
sure
to
stop
the
engine
and
remove
the
key before
changing
the
oil.
[RCK60B-23BX, RCK54-23BX]
1.
Dismount the mower from the tractor, and place the mower
on
level ground.
2.
Remove the oil filler plug (2).
3.
Remove the drain plug (1), and drain the used oil completely.
4.
After draining the used oil, reinstall the drain plug.
5.
Fill with new oil up to the specified level.
[RC K54P-23BXJ
1.
To drain the used oil, remove the oil filter plug (2) at the mower
gear box, tilt the mower deck and drain the oil completely into the
oil pan.
2.
After draining, reinstall the filter plug (2).
3.
Fill with new oil up to the filter plug port.
4.
After filling, reinstall the oil filter plug (2) .
• IMPORTANT
• Use
the
specified gear oil.
Refer
to
"LUBRICANTS". (See page 7-S2.)
(1) Drain Plug
[A]
RCK60B-23BX, RCK54-23BX
(2) Oil Filter Plug [B) RCK54P-23BX
W1017456
(3) Check Point
of
Every 150 Hours
Changing Gear
Box
Oil
1.
See above.
W1017729
(4) Check Point
of
Every 2 Years
Replacing Gear
Box
Oil Seal
1.
Replace the gear box oil seals (1), (2) with new ones.
(1) Oil Seal (2) Oil Seal
W1017780
3GMAAACMP013A
7-57