Operation Manual
BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601,
WSM
ROTARY MOWER
3TAAAAFMP016A
n
(3)
A
B
C-----J.;:;
D---;-O
E
F
G
3TAAAAFMP017 A
Cutting Height
A DANGER
• Never operate the mower in transport position .
• IMPORTANT
• (for self-balance suspended linkage)
To reduce the stepped difference in cutting height when
mowing rolling terrain, follow the procedure below.
1.
To set the cutting height, move the hydraulic control lever
rearward to raise the mower to the highest position. Turn the
cutting height control dial (1) to adjust height.
2.
Set the anti-scalp roller's (3) height
as
shown to keep clearance
between rollers and ground from 6 to
13
mm
(0.2 to 0.5 in.).
3.
Lower the mower deck by moving the hydraulic control lever (2)
forward.
4.
Use the higher settings for mowing in a rough area or when
mowing tall grass. Lower settings should be used only for
smooth lawns where short grass
is
desired.
5.
To set the cutting height, move the hydraulic control lever (2)
rearward to raise the mower to the highest position. Turn the
cutting height control dial to adjust height.
6.
Set the anti-scalp roller's (3) position
as
shown to have the same
cutting height.
Dial (Cutting Height) Anti-scalp Roller
25
mm
(1.0 in.), 32
mm
(1.25 in.)
G
38
mm
(1.5 in.), 45
mm
(1.75 in.)
F
51
mm
(2.0 in.),
57
mm
(2.25 in.)
E
64
mm
(2.5 in.),
70
mm
(2.75 in.)
D
76
mm
(3.0 in.), 83
mm
(3.25 in.)
C
89
mm
(3.5 in.),
95
mm
(3.75 in.) B
102
mm
(4.0 in.)
A
(1) Cutting Height Control Dial (3) Anti-scalp Roller
(2) Hydraulic Control
Lever
W1019383
7-515