Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
FRONT LOADER
3TAAAAGLP030A
[2] MOUNTING FRONT LOADER TO TRACTOR
Side Frame and Hoses
1. Slowly drive the tractor between the loader side frames until the
rear portion
of both side frames touches the main frames as
shown.
2. Stop the engine.
3. Connect four hoses with couplers to the nipple on the control
valve as indicated with color marks. Then connect the protective
caps and plugs to each other.
4. Start the engine and run at idle.
5. Slowly move the loader control lever to dump position to lower
the side frames into the main frames and engage the bosses
of
the main frames to the guide bosses of the side frames. Then lift
the front wheels slightly with the loader .
• IMPORTANT
• Do not attempt to lift the front wheels with the stand.
6. Stop the engine. Reinstall the mounting pins and secure them
with the locking rods.
7. Start the engine.
8. Raise the boom until the stand can be rotated.
9. Stop the engine.
10.Store the stand to their original positions and secure it with the
spring pin as shown.
11.Start the engine.
12.Lower the boom and level the bucket.
(1) Side Frame (4) Loader Control Lever
(2) Main Frame (5) Spring
Pin
(3) Hose (6) Stand
W1020231
3TAAAAGLP031A
8-S10