Operation Manual

BX25. RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
FRONT LOADER
6. CHECKING, DISASSEMBLING AND SERVICING
[1] CHECKING AND ADJUSTING
Relief Valve Setting Pressure
• NOTE
• The relief valve
is not installed on this model. However the
relief valve
of the tractor hydraulic system is used as the
relief valve
of the front loader. Refer to hydraulic section.
(Reference)
Relief valve setting
pressure
Factory spec.
12.3 to 12.7 MPa
125 to 130 kgf/cm
2
1778 to 1849 psi
Condition
• Engine speed ....... Maximum
• Oil temperature ..... 45 to
55°C
113t0131 of
W1014688
[2] DISASSEMBLING AND ASSEMBLING
(1) Control Valve
Step and Battery
A CAUTION
• When disconnecting
the battery cables, disconnect the
negative cable from the battery first. When connecting,
connect the positive cable
to the battery first.
1. Remove the under panel (1).
2. Disconnect the negative cable (3) from the battery (2).
3. Remove the valve covers (4).
4. Remove the HST pedal (5) and the step (6).
(1) Under Panel (4) Valve Cover
(2) Battery (5) HST Pedal
(3) Negative Cable
(6) Step
W1012394
8-S11