Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
G GENERAL
Adjusting Front Axle Pivot
1. Remove the split pin (2), tighten the adjusting nut (1).
2. Make sure that one of the nut slots aligns with the split pin hole,
tighten the nut slightly
if necessary to align.
3. Replace the split pin.
u
3TAAAAGOP017 A
20N'm
lightening torque Factory spec.
2.0 kgf·m
15 ft-Ibs
(1) Adjusting Nut (2) Split Pin
W1019713
[7] CHECK POINT OF EVERY 500 HOURS
Replacing Fuel Filter Element
1. Disconnect the fuel hoses and replace the fuel filter (2).
2. Disconnect the fuel hoses and loosen the pipe clamp to replace
the fuel filter (5) .
• NOTE
•
If the fuel line is removed, be sure to properly bleed the fuel
system. (See page G-30.)
(1) Fuel Pump (4) Hose Clamp
(2) Fuel Filter
(5) Fuel Filter
(3) Fuel Line
W1019858
G-25