Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
BACKHOE
(1) (2)
(3) (4)
3UFAAABLP039A
•
(5)
I
. 1
..
3UFAAABLP040A
Installing O-ring and Piston Seal
1. Place the slide jig (2) on the piston (4).
2. Install the O-ring (3) on the piston using the slide jig.
3. Install the piston seal (1) over the O-ring using the slide jig.
4. Compress the piston seal to the correct size by installing the
piston into the correcting jig (5) .
• NOTE
• Do not turn (roll) the piston seal as you install it.
(1) Piston Seal (4) Piston
(2) Slide Jig (5) Correcting Jig
(3) O-ring
W1022984
9-S22