Operation Manual

BX25, RCK54(P)-23BX. RCK60B-23BX. LA240. BT601, WSM
ENGINE
[2] DISASSEMBLING AND ASSEMBLING
• Before proceeding this section, disassembling the loader assembling and backhoe. (Refer to section 8
and 9.)
(1) Separating Engine
Draining Engine Oil
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. Remove the drain plug (1) to d rain oil.
4. After draining, screw in the drain plug (1).
(When refilling)
• Fill the engine oil up to the upper line on the dipstick (3) .
• IMPORTANT
• Never mix two different type of oil.
• Use the proper SAE Engine Oil according to ambient
temperature.
Refer to "LUBRICANTS, FUEL AND COOLANT" (See page
G-7).
3.1 L
Engine oil
Capacity 3.3 U.S.qts
2.7Imp.qts
(1) Drain Plug (A) Oil level is acceptable within this
(2) Oil Inlet
range
(3) Dipstick
W1023464
Battery Cables and Battery
A CAUTION
• When disconnecting the battery cables, disconnect the
negative cable from the battery first. When connecting,
connect the positive cable to the battery first.
1. Remove the under panel.
2. Disconnect the negative cable (2) from the battery (1).
3. Disconnect the positive cable (3) from the battery (1) and remove
the battery (1).
(1) Battery
(3) Positive Cable
(2) Negative cable
W1045893
1-822