OPERATOR'S MANUAL
Table Of Contents
- OPS - Excavator K008-3 (RA028-8222-2)
- List of Abbreviations
- General Symbols
- Foreword
- Safety First
- Contents Page
- Safe Operation
- Dealer Service
- Technical Data
- Description of Machine Parts
- Instrument Panel and Control Elements
- Before Start
- Operation of the Engine
- Excavator Operation
- Control Observations During Operation
- Running In of the New Excavator
- Starting
- Controls for Attachments
- Operation of the Boom
- Operation of the Arm
- Operation of Bucket
- Swivel (Unit Swing) Operation
- Boom Swing Operation
- Boom Swing Pedal
- Operation of Track Width Change and Dozer
- Driving
- Turns
- Up and Downhill Travelling
- Parking on a Slope
- Drive Speed Pedal
- Service Port Operation
- Important Information on Excavator Operation
- Operating Foldable ROPS
- Transporting the Excavator on a Truck
- Lifting of the Excavator
- Maintenance
- Regular Checks and Maintenance Work
- Other Adjustments and Replacements
- Troubleshooting
- Operation in Cold Weather Conditions
- Long Storage
- Recommended Oils
- Main Dimensions
- Lifting Capacity
GENERAL SYMBOLS
The instruments and operation elements have been marked with a series of symbols in order to
simplify the operation of your excavator. These symbols are listed below with the respective
descriptions.
3
Safety alert Symbol
¶
Alarm lamp “Fuel level too low”
•
Alarm lamp “Engine oil pressure”
Alarm lamp
“Water temperature warning”
g Alarm lamp “Battery charge”
5 Horn
R Diesel
E Hydraulic fluid
j Fast
k Slow
Excavator - Overhead movement
toward the front
Excavator - Overhead movement
toward the rear
Boom raise
Boom lower
Arm out
Arm in
Bucket dig / rollback
Bucket dump
Boom swing (left)
Boom swing (Right)
Dozer raise
Dozer lower
Operation direction of control lever
Operation direction of control lever
Read operator’s manual
Lock
Unlock
Reducing / Increasing track width