OPERATOR'S MANUAL
Table Of Contents
- OPS - Excavator K008-3 (RA028-8222-2)
- List of Abbreviations
- General Symbols
- Foreword
- Safety First
- Contents Page
- Safe Operation
- Dealer Service
- Technical Data
- Description of Machine Parts
- Instrument Panel and Control Elements
- Before Start
- Operation of the Engine
- Excavator Operation
- Control Observations During Operation
- Running In of the New Excavator
- Starting
- Controls for Attachments
- Operation of the Boom
- Operation of the Arm
- Operation of Bucket
- Swivel (Unit Swing) Operation
- Boom Swing Operation
- Boom Swing Pedal
- Operation of Track Width Change and Dozer
- Driving
- Turns
- Up and Downhill Travelling
- Parking on a Slope
- Drive Speed Pedal
- Service Port Operation
- Important Information on Excavator Operation
- Operating Foldable ROPS
- Transporting the Excavator on a Truck
- Lifting of the Excavator
- Maintenance
- Regular Checks and Maintenance Work
- Other Adjustments and Replacements
- Troubleshooting
- Operation in Cold Weather Conditions
- Long Storage
- Recommended Oils
- Main Dimensions
- Lifting Capacity
13EXCAVATOR OPERATION
STARTING
To avoid personal injury:
A No persons, other than those familiar
with the excavator, are allowed to use
the excavator.
A Do not allow any person other than
the operator to ride on the excavator.
BSeat Belt and Adjusting the
Operator's Seat
To avoid personal injury or death:
A Always use the seat belt if a ROPS
protection construction is built in.
Adjust the seat to the optimal position
and buckle up.
1. Adjusting the Operator's Seat
To avoid personal injury:
A Before adjusting the operator's seat,
make sure that no one puts hands on
the engine bonnet behind the seat.
A After having adjusted the seat, make
sure that the seat adjuster has clicked
into position.
2. Bring the lock lever into the
"Unlock" position.
To avoid personal injury:
A Check safety aspects all around the
excavator.
Please bring the lock lever into the "Unlock"
position, and raise the lower side of the bucket
from the ground by 20 to 40 cm.
To and fro : While holding up the to-and-fro
adjustment lever, reposition the
seat to and fro.
(1) To-and-fro adjustment
lever
(2) Seat belt
(A) "Hold up"
(1) Lock lever (A) "Lock"
(B) "Unlock"