OPERATOR'S MANUAL
Table Of Contents
- OPS - Excavator K008-3 (RA028-8222-2)
- List of Abbreviations
- General Symbols
- Foreword
- Safety First
- Contents Page
- Safe Operation
- Dealer Service
- Technical Data
- Description of Machine Parts
- Instrument Panel and Control Elements
- Before Start
- Operation of the Engine
- Excavator Operation
- Control Observations During Operation
- Running In of the New Excavator
- Starting
- Controls for Attachments
- Operation of the Boom
- Operation of the Arm
- Operation of Bucket
- Swivel (Unit Swing) Operation
- Boom Swing Operation
- Boom Swing Pedal
- Operation of Track Width Change and Dozer
- Driving
- Turns
- Up and Downhill Travelling
- Parking on a Slope
- Drive Speed Pedal
- Service Port Operation
- Important Information on Excavator Operation
- Operating Foldable ROPS
- Transporting the Excavator on a Truck
- Lifting of the Excavator
- Maintenance
- Regular Checks and Maintenance Work
- Other Adjustments and Replacements
- Troubleshooting
- Operation in Cold Weather Conditions
- Long Storage
- Recommended Oils
- Main Dimensions
- Lifting Capacity
18 EXCAVATOR OPERATION
OPERATION OF THE ARM
Pull back the left attachment control lever and
the arm will be pulled in. To move the arm out,
push the control lever towards the front.
A When pulling in the arm, the movement may
stop for a short moment when the arm is in
its vertical position. This is caused by the
fact that at this position the maximum load
for the arm and bucket is reached, and the
hydraulic pressure in the cylinder is not high
enough. This is a characteristic of the
hydraulic system and is not a sign of a
malfunction.
OPERATION OF BUCKET
To dig with the bucket, move the right
attachment control lever from the neutral
position towards the left. Moving the control
lever towards the right pushes the bucket
outwards and dumps its contents.