OPERATOR'S MANUAL
Table Of Contents
- OPS - Excavator K008-3 (RA028-8222-2)
- List of Abbreviations
- General Symbols
- Foreword
- Safety First
- Contents Page
- Safe Operation
- Dealer Service
- Technical Data
- Description of Machine Parts
- Instrument Panel and Control Elements
- Before Start
- Operation of the Engine
- Excavator Operation
- Control Observations During Operation
- Running In of the New Excavator
- Starting
- Controls for Attachments
- Operation of the Boom
- Operation of the Arm
- Operation of Bucket
- Swivel (Unit Swing) Operation
- Boom Swing Operation
- Boom Swing Pedal
- Operation of Track Width Change and Dozer
- Driving
- Turns
- Up and Downhill Travelling
- Parking on a Slope
- Drive Speed Pedal
- Service Port Operation
- Important Information on Excavator Operation
- Operating Foldable ROPS
- Transporting the Excavator on a Truck
- Lifting of the Excavator
- Maintenance
- Regular Checks and Maintenance Work
- Other Adjustments and Replacements
- Troubleshooting
- Operation in Cold Weather Conditions
- Long Storage
- Recommended Oils
- Main Dimensions
- Lifting Capacity
23EXCAVATOR OPERATION
BDrive Levers (Right, Left)
To avoid personal injury or death:
A If the swing frame has been turned
180 , i.e. the dozer is, seen by the
operator, "behind", then the travel
direction is opposite to the drive
direction of the levers (when
activating the drive lever forwards,
the excavator, seen by the operator,
will move backwards).
Pushing the drive lever forward, moves the
excavator forward, and vice-versa. The front of
the excavator is the direction where the dozer is
present.
A If the crawler is clogged with sand or gravel
while working on soft ground, lift up one
crawler with the help of the boom, arm and
bucket and let the crawler rotate to shake off
the sand and gravel.
TURNS
To avoid personal injury:
A Do not change direction on steep
slopes, or the excavator could tip
over.
A Before changing direction, beware of
persons in the working area.
BPivot Turn
A Movement as illustrated shows turning
motion with the dozer positioned facing the
front.
When the dozer is facing the back, the turning
direction is reversed.
(For example, push the left (right) drive lever
forward; right (left) crawler, seen by the
operator, will move backward from the
operator.)
(1) Drive lever (left)
(2) Drive lever (right)
(A) "Forward"
(B) "Backward
(A) "Forward"
(B) "Backward
(A) "Rotate to shake off
sand and gravel"