OPERATOR'S MANUAL
Table Of Contents
- OPS - Excavator K008-3 (RA028-8222-2)
- List of Abbreviations
- General Symbols
- Foreword
- Safety First
- Contents Page
- Safe Operation
- Dealer Service
- Technical Data
- Description of Machine Parts
- Instrument Panel and Control Elements
- Before Start
- Operation of the Engine
- Excavator Operation
- Control Observations During Operation
- Running In of the New Excavator
- Starting
- Controls for Attachments
- Operation of the Boom
- Operation of the Arm
- Operation of Bucket
- Swivel (Unit Swing) Operation
- Boom Swing Operation
- Boom Swing Pedal
- Operation of Track Width Change and Dozer
- Driving
- Turns
- Up and Downhill Travelling
- Parking on a Slope
- Drive Speed Pedal
- Service Port Operation
- Important Information on Excavator Operation
- Operating Foldable ROPS
- Transporting the Excavator on a Truck
- Lifting of the Excavator
- Maintenance
- Regular Checks and Maintenance Work
- Other Adjustments and Replacements
- Troubleshooting
- Operation in Cold Weather Conditions
- Long Storage
- Recommended Oils
- Main Dimensions
- Lifting Capacity
31TRANSPORTING THE EXCAVATOR ON A TRUCK
3. For additional safety, use blocks or struts
under the ramps and the truck bed.
4. Completely align the ramps and the crawlers
and then drive the excavator slowly up the
ramps with the dozer in the front. After
ensuring that the crawlers are completely on
the truck bed, swivel the upper body around
to the back of the truck.
5. Lock the swing frame with the swing lock pin.
6. Block the crawlers and tie down the
excavator.
7. Before unloading, remove the swing lock pin
and then raise the dozer and bucket from the
truck bed.
(1) Swing lock pin (A)" Unlock"
(B) "Lock"