OPERATOR'S MANUAL

39MAINTENANCE
BLubrication Points
To avoid personal injury:
A First lower all attachments on the
ground then stop the engine.
A While greasing, take care not to step
on the bucket teeth.
A When doing excavation work in water,
generously grease the following
points. After finishing work, grease
again.
Grease the marked grease nipples shown by
arrows in the illustration below.
1. Boom bottom linkage ....................... 1 place
2. Arm bottom linkage .......................... 1 place
3. Boom cylinder boss ........................ 2 places
4. Arm cylinder boss ........................... 2 places
5. Bucket cylinder pin ........................... 1 place
6. Boom swing fulcrum ....................... 2 places
7. wing cylinder boss ............................ 1 place
8. Dozer linkage pin ........................... 2 places
9. Dozer cylinder boss ......................... 1 place
10.Bucket link pin ................................ 2 places