OPERATOR'S MANUAL

CHECKS BEFORE START10
C Overheat warning
1. If the coolant temperature becomes too high, the
message "Water temp is Rising" appears onscreen
for a certain period of time. The LCD then gets back to
normal, but the coolant temperature sensor marker
" " starts blinking at 1-second intervals.
A If this message is displayed, interrupt the work and
lower the engine rpm, which will reduce the coolant
temperature.
2. The overheat warning appears onscreen. Also the
following message shows up on the LCD, and the
engine automatically starts idling. (Acceleration is not
operative.)
If the above message appears, take corrective measures,
referring to the "Precautions in case of Overheat"
section.
A When the coolant temperature has dropped,
acceleration can be automatically enabled.
C Hour-meter
Indicates the total operating hours of the machine.
How the indicator works
A The meter advances one hour after an hour of
operation regardless of the engine rpm.
C Engine tachometer
Indicates the current rpm of the engine.
(1) Coolant temperature sensor marker
(1) Hour-meter
(1) Engine tachometer