OPERATOR'S MANUAL

EXCAVATOR OPERATION40
BSetting the Maximum Flow Volume
The AUX port has been factory-set to three action modes
1, 2 and 3. The action modes 4 and 5 can also be preset.
C How to make the settings
1. With the starter key at the "RUN" position, press the
user setting switch (switch 1), and the following display
appears onscreen.
2. Press the switch 2 or 3 to select "AUX Flow Ctrl Set",
and then press the switch 5.
3. Each time the switch 5 is pressed, the mode number
changes. Select your desired setting mode number.
4. Take the following steps to set the icons.
Each time the switch 4 is pressed, the setting cursor
(arrow mark) shifts position. Move the cursor above
the icon.
(1) User setting switch (switch 1)
(1) Switch 2 and 3
(2) Switch 5
(1) Icon
(2) Mode No.
(3) Switch 5
(1) Setting cursor (arrow mark)
(2) Icon
(3) Switch 4