Dual Fuel Ranges Manual

18
The wiring diagram for the terminal connecon block sck on the the access cover.
Gas Supply Requirement
Installaon of this range must conform with local codes, or in the absence of local codes,
with naonal Fuel Gas Code，ANSIZ223.1 / NFPA 54. In Canada, installaon must conform
to the current natural Gas Installaon /code, CAN 1-1.1-M81 and with local codes where
applicable. This range has been design-cerfied according to ANSIZ21.1a, latest edion.
MAXIMUM GAS SUPPLY PRESSURE TO APPLIANCE FOR LP GAS---13.0 IN.W.C.
MAXIMUM GAS SUPPLY PRESSURE TO APPLIANCE FOR NG GAS---10.0 IN.W.C.
APPLIANCE REGULATOR IS SET AT 10.0IN.W.C. OUTLET PRESSURE FOR LP.
APPLIANCE REGULATOR IS SET AT 5.0IN.W.C. OUTLET
PRESSURE FOR NG.
Keep appliance area clear and free from combusble materials, gasoline, and other
flammable vapors.
Do not obstruct the flow of combuson air into the range and venlaon air away from
the range.
Venlaon: it is recommended that the unit be set under a powered, vented exhaust
hood of sufficient size and capacity.
Before installing the range, you must locate and secure the included an-p bracket to
the wall for your range.
Caution: The use of cabinets for storage above the appliance may result in a potenal
burn hazard. Combusble items may ignite; metallic items may become hot and c
ause
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE
WWW.KUCHT.COM