User manual

FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
Page 12 of 12
Please Note:
a. Do not use abrasive cleaners to clean the wine & beverage cooler.
b. Use mild, soapy water to clean the unit’s door seal.
c. To ensure efficient operaon, also thoroughly clean the back and
boom of the wine and beverage cooler.
TROUBLESHOOTING
Problem
Possible Causes
Solution
The wine and
beverage
cooler does
not cool.
The unit may be plugged
in using a different
voltage.
Check if using the wrong
voltage.
The circuit breaker may be
tripped or there is a blown
fuse.
Reset the circuit breaker or
check for a broken fuse.
The wine and
beverage
cooler does
not get cold
enough.
The unit may be placed
too close to a heat source.
Keep the unit away from
direct sunlight or other
heat sources.
There is insufficient
venlaon.
Place the unit in an area
with proper venlaon and
clearances.
The door is not completely
closed or the door seal is
not working properly.
Close the door ghtly. Do
not open the door
frequently or keep the door
open for extended periods.
The wine and
beverage
cooler seems
to make too
much noise.
The unit is not leveled or
posioned properly.
Adjust the unit’s feet and
ensure the product is level.
There is insufficient
venlaon.
Allow sufficient clearance
around the unit.
The unit is too close to a
wall or other surface.
Allow sufficient clearance
around the unit.
Frost is
building up in
the unit.
There is excess humidity
or the interior
temperature is too low.
Turn the unit off, unplug it
and remove the frost
manually. Reconnect once
the ice has thawed.