Installation Guide and User Manual

ManualsBrandsKucht ManualsAppliances30 Inch Gas Sealed Burner Rangetop

Symptom

Possible Cause

Solution

BURNER FLAME

Low gas

Contact gas company.

GOES OUT AT

LOW SETTING

pressure.

Air in take

holes around

burners are

obstructed.

Remove obstruction from air

intake holes. Simmer setting

is to low

THE FLAME SHAVE

SUDDENLY

GONE OUT

A draft or spill Has

extinguished the

ﬂame.

Turn the burners o, cleaning

the burners

And sump area. See “Care an

d

Cleaning” for instructions.

Once clean reignite top

burners.

NO IGNITION

SPARK

Dead batteries

Or ignition

module failed.

Replace batteries and

attempt ignition. If There is

still no spark ignition, the

range top burner scan still

be used.

To light them:

1.) Holding a lit match to the

ﬂame spreader, pushing

on the control knob and

turn counter clock wise to

LIGHT.

2.) When the ﬂame is

burning all the way

around the burner, you

may adjust the heat.

“CRACKING”

This is the sound

This is normal.

OR

“POPPING”

SOUND IS

Of metal heating

and cooling.

COMING FROM

RANGE TOP

27