Installation Guide and User Manual

INSTALLATION GUIDE AND USER MANUAL
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
Symptom
Possible Cause
Solution
BURNERS WILL
NOT LIGHT.
Burner parts or
Igniters maybe wet,
dirty or
misaligned.
Check that the burner
parts are clean, dry And
correctly assembled.
Check that the igniters
are clean and dry.
TOP BURNER
WILL NOT STAY
LIT
Failed Thermocouple
Replace thermocouple
FLAMES DO NOT
Burner parts
See “Care and Cleaning”
instructions.
BURN ALL
AROUND THE
BURNER CAP.
Maybe dirty or
misaligned.
BURNER
FLAMES
Burner bezel
Clean burner with a
ARE VERY
LARGE AND
YELLOW.
Ports are clogged.
Burner ports or burner
caps are not
positioned properly.
straightened paperclip,
needle, or wire.
Remove and carefully
re‐install burner bezel
and caps.
Ensure that the type of
range top matches the gas
supply.
Range top is being
operated with the
wrong type of gas.
Check installation, replace
regulator, or set regulator
for proper gas.
Regulator is not
installed, is faulty, or
is set for the wrong
type of gas.
IGNITERS ARE
Gas shut
‐
o
Turn shut
‐
o valve to the
“ON” position.
SPARKING BUT
BURNERS ARE
NOT IGNITING.
Valve is in the “OFF”
position.
TROUBLESHOOTING
26