Installation Guide and User Manual

To prevent gas leaks, use pipe joint compound resistant to NG gases on all male external

pipe threads.

1. In an easily accessible location, install a service manual gas shut o valve. Be sure

everyone operating the range top knows where and how to shut o the gas supply to the

cook top.

2. Use a ﬂexible gas line to connect to the 1/2” ﬁtting,located on the bottom right hand

corner underneath the range top.

3. When all connections have been made, be sure all range top controls are in the o

position and turn on the main gas supply valve. Check for gas leaks by using a 75% water,

25% dish-washing soap solution. If a gas leak is present, shut o gas immediately, tighten

all connections, and retest for leaks.

4. Any opening in the wall behind the appliance and in the ﬂoor under the Appliance shall

be sealed.

INSTALLATION GUIDE AND USER MANUAL

FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM