Dimensions Guide

8 E
Before operating your new Drawer Microwave make sure you
read and understand this Use and Care Guide completely.
The following steps MUST be taken before any functions can
be used.
Before you use the Drawer Microwave:
1. Plug in the Drawer Microwave. ENJOY YOUR MICROWAVE TOUCH
CLEAR AND TOUCH CLOCK will appear.
2. Touch the Stop/Clear pad. : will appear.
3. Set clock.
TO SET THE CLOCK
1. Touch Timer/Clock pad and number 2.
2. Enter the correct time of day by touching the numbers in
sequence. Touch Timer/Clock pad.
This is a 12 hour clock. If you attempt to enter an incorrect clock
time, ERROR will appear in the display. Touch the Stop/Clear pad
and re-enter the time.
• If the electrical power supply to your Drawer Microwave
should be interrupted, the display will intermittently show
ENJOY YOUR MICROWAVE TOUCH CLEAR AND TOUCH CLOCK after the
power is reinstated. If this occurs during cooking, the program
will be erased. The time of day will also be erased. Simply
touch Stop/Clear pad and reset the clock for the correct time
of day.
STOP/CLEAR
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during timed cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
OPEN OR CLOSE DRAWER MICROWAVE
Always Touch the OPEN or CLOSE pad on the control panel to
open or close the Drawer Microwave.
Do not push or pull the drawer by hand, except in case of
emergency, such as a power failure. If necessary, push or
pull slowly.
BEFORE OPERATING