www.kucht.
IMPORTANT: Read and save these instructions. NOTICE: Installer: Leave this guide with the homeowner. Homeowner: Keep this guide for future reference. WARRANTY KUCHT Warranty covers defects in Parts and Labor for functional parts that are the result of normal usage for a period of time of 4 Years for Parts and Labor from date of purchase. Functional parts are those components parts that are critical to the performance of the product\’s essential function.
INSTALLATION GUIDE AND USER MANUAL IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, READ THE FOLLOWING: Use this unit only un the manner intended by the manufacturer. If you have questions, please contact the manufacturer. Before servicing or cleaning the unit, switch the power off and lock the service panel. This will prevent the power for accidentally turning on.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty. 2. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally.
INSTALLATION GUIDE AND USER MANUAL TOOLS & PARTS REQUIRED FOR INSTALLATION Electrical drill or ratchet driver 1/2” drill bit for drilling pilot holes 1 1/4” drill bit for drilling electrical wiring access hole Screwdriver: Phillips & Straight blade Pliers Tape Measure or ruler + pencil Electrical supplies for wiring Aluminium foil tape and/or HVAC tape Hammer Jigsaw or saber saw Stud finder CONTENT OF THE BOX Body (Main Unit): 1 pc Installation Manual: 1 pc Metal Grease Filter: 1-4 pcs Hardware: 1 set LO
VENTILATION REQUIREMENTS Range hoods must be ventilated to the outdoors, except for non-vented (recirculating) installations. Do not ventilate the range hood into an arric or other encloed areas. Do not use 4” (10.2 cm) laundry-type wall caps. The length of the range hood exhaust and the number of elbows should be kept to a minimum to provde maximum performance. Use no more than three 90° elbows. Make sure there is a minimum of 24” (61 cm) of straight duct between the elbows if more than one elbow is used.
INSTALLATION GUIDE AND USER MANUAL ELECTRICAL REQUIREMENTS & SPECIFICATIONS IMPORTANT: Observe all governing codes and ordinances. It is the customer’s responsibility to contact a qualified electrical installer. A 120 Volt, 60 Hz, AC only, fused electrical supply is required on a 15-amp circuit. DO NOT have a fuse in the neutral or ground circuit. The 3-prong outlet should be grounded. If the power cord plug is not used, the power cord’s green wire should be connected to ground.
ATTENTION HOMEOWNER These installation steps are meant to be a general guideline for mounting and installing your under cabinet range hood. If you require assistance, please contact your local contractor. Please exercise extreme caution when handling a range hood to prevent risk of injury and electric shock. Building codes will vary. It is the buyer or contractor’s responsibility to know local county or state regulations before installation of this range hood.
INSTALLATION GUIDE AND USER MANUAL ATTENTION HOMEOWNER Two people will be required to lift and install the main unit. We highly recommend professional help and an extra set of hands. Measure the distance between the stove top and the bottom of the range hood. A distance of 24” to 32” is recommended. There are two methods (A or B) to mount the range hood, choose the one that better fits your setup and model.
INSTALLATION GUIDE AND USER MANUAL STEP 2 For safety purposes, pre-drilled mounting holes are provided through the back of the hood. For a more secure installation, use as many mounting holes as needed to secure the unit from the inside of hood. STEP 3 Use a 8"diameter (size may vary) venting pipe (follow building codes in your area) to connect the exhaust on the hood to the ductwork above. Use HVAC foil tape / duct tape to make all joints secure and air tight. SAFETY WARNING: Risk of electrical shock.
INSTALLATION GUIDE AND USER MANUAL CONTROL PANEL LAYOUT AND BUTTONS SETTINGS A) REMOTE CONTROL: Same function as “power” button B) CLOCK / DELAY SETTING: When fan is running, press time delay button, time delay button will blink, press + or the system will automatically shut down after 1 - 15 minutes. press + or - to choose the time delay or exit function. C) LAMP: Press the lamp icon one time to active the light, press it again to turn the light off.
SUPPORT AND SERVICE This range hood comes with full unlimited lifetime support. This means that if you come across any problem after the warranty has expired, a qualified Kucht member will assist you or your trusted technician using video chat in any repair process. You will also have access to repair videos, tutorials, manuals, and any extra help that is available. TO ARRANGE FOR SERVICE Prior approval from Customer Service is required prior to start the service.
WE TRANSFORM A SIMPLE KITCHEN INTO A PRO ONE. THIS IS WHY WE CARE ABOUT MAKING VERY HIGH PERFORMANCE RANGES AND HOODS, TO MAKE YOU FEEL LIKE A PRO AND STYLISH COOKER. DESIGN: LONDON DC - WWW.LONDON-DC.COM FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.
