Specification

FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
2) According to marks, drill two holes appropriate for heavy duty
wall anchors and screws（not included. Mount the range hood
on the wall with the two screws and anchors and tighten.
3) Install the one-way valve on top of the range hood and
assemble the exhaust pipe and decorative cover.
4) Affix the decorative cover with two M4 tapping screws on the
hood body.
5) Make sure all switches are off and then insert the electrical plug into an outlet.
3. Technical parameters
4. Maintenance
1) Make sure to pull out the plug and cut off the power before maintenance to ensure your safety.
2) Clean the inside and outside of the range hood with warm water containing neutral detergent, then dry them with a
piece of dry cloth. Do not scrub them with rough materials such as cleansing ball to avoid damages to the surface.
Put on gloves to avoid injuring your hands when cleaning the inside. The cleaning can be done once half a month to
a month.
3) Do not crush the wind wheel when cleaning the inside of the wind track of the wind wheel to avoid the deformation
of the wind wheel. Otherwise the movement will be increased, which will result in more noise and influence the effect
of absorbing the oil-smoke.
4) Frequent cleaning of the filter shall be done. First press the spring on the edge of the filter to dismantle the filter,
dip it into strong detergent and brush its surface with soft brush; then hold the filter with both hands and move it up
and down in the detergent, clean it with clean water, after which dry it by airing and install it as what it is as before.
The cleaning can be done once a week. Do not clean it with combustible detergent such as banana oil and gasoline.
ITEM unit parameter
Rated Voltage V 110
Rated frequency Hz 60
Motor input power W 198
Lamp power W ≤2X20
Air volume m3/min 9.5~15
Air pressure Pa >160
Noise level dB(A) <70
Air output diameter mm 150