Dimensions Guide

Installation
If possible, unplug the stove and move it in order to have better access to the rear wall. Otherwise, place a thick blanket on
the counter and the cooking surface to protect it from damage and dirt. Select a flat surface for assembling the device.
Then put the debris of the cover and hardwareon to theprotective cap.
Determine and mark the center line on the wall where you installed the canopy hood.
Determine a comfortable height for the user and mark it on the wall behind the stove top.
Place the template on the center line and the bottom of the hood with adhesive tape.
Place the squares of the flue
The flue must be installed against the back wall and the ceiling.
This bracket will keep the chimney up to the top.
Attach the brackets to the wall:
Align the center lines drawn on the bracket with the center lines on the wall.
Identify the two screw holes on the wall.
Drill pilot holes 5/16 "in the locations shown.
Place the fastening
clips to the wall.
Tighten wood screws, by hand, in the attachments to allow hooks to expand. Remove the screws.
•Drill guide hole,5/16inch.
•Make clamp fix to the wall, screw down the bolts on the wall.
Attach the bracket to the wall using the screws and / or fasteners.
Ceiling pipe
If the duct vents just above the ceiling:
Use a level to draw a line, the center line of the template to the ceiling.
Measure at least 4 "from the back wall to the center of the circle with a hole 7 - ½" in the ceiling.
Lead in the wall If the duct vents at the rear:
Note: For a minimum extension of the chimney, we recommend using an adapter circular / rectangular fireplace.
Use a level to draw a straight line from the center line on the template.
Measure at least 26 - 1/4 "(the measure may vary elbow used) above the pencil line indicating the height of the bottom of the
system, the circle of a conduit hole 7
- ½ "in diameter (the hole may be enlarged for the passage of the elbow).
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL