Use and Care Manual

FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
TROUBLESHOOTING TIPS
Symptom
Possible Cause
Solution
Burner flame goes out at
low seing.
Low gas pressure.
Air intake holes around
burners are obstructed.
Contact gas company.
Remove obstruction from air intake
holes.
The flames have suddenly
gone out.
A draft or spill has
extinguished the flame.
Turn the burners off, cleaning the
burners and sump area.
Once clean reignite top burners.
No ignions park
Dead batteries or ignition
module failed.
Replace batteries and aempt
ignition. If
There is still no spark ignition, the
range top burners can still be used.
To light them:
1.) Holding a lit match to the flame
spreader, push in on the control
knob and turn counterclockwise to
LIGHT.
2.) When the flame is burning all the
way around the burner, you may
adjust the heat.
“Cracking” or “popping”
sound is heard coming
from range top
This is the sound of metal
heating and cooling.
This is normal.