K X S E R I E S Oven Operation Guide APPLICABLE MODEL: KXP36-SS, KXP36-GL, KXD36, KXP30-SS, KXP30-GL, KXD30, KXP48-SS, KXP48-GL, KXD48, KXP60-SS, KXP60-GL
INDEX Product Specifications Display Instructions Function Instructions 1. Power on 2. Standby State 2.1. Clock Setting 3. Start up State 3.1. Heating Mode Setting 3.2. Temperature Setting 4. Heating State 5. End State 6. Lamp Setting 7. Fan Setting 8. Door Detection 9.
PRODUCT SPECIFICATIONS Display type LED Display light White Button number 5 Control method Knob Button type Touch + Button Temperature performance T120 Input voltage 240V Working voltage 240V/120V Rated frequency 60Hz 3
DISPLAY INSTRUCTIONS 4
FUNCTION INSTRUCTIONS 1. POWER ON 1. After the product is powered on, there will be a "power on sound". The screen will display the product Logo and clock 12:00 (blinking), and the Finger Button will appear white. Next, enter the Clock Setting in the Standby State. 2. As long as the product is powered on, the Logo will always light up. 2. STAND-BY STATE 1. ln normal Stand-by State, only the product Logo, clock, and Finger Button are displayed on the screen. 2.
FUNCTION INSTRUCTIONS 2.1. CLOCK SETTING 1. After entering the Clock Setting, the clock blinks, indicating that the current clock can be adjusted, and the clock can be adjusted by turning the knob. The clock is set to 12 hours. 2. After adjusting the clock, click the Finger Button or do not operate for 5 seconds to exit the Clock Setting and return to the normal display in the Standby State. 3. START UP STATE 1.
FUNCTION INSTRUCTIONS 3.1. HEATING MODE SETTING 1. This product provides two heating modes, namely bottom element heating and grill heating. 2. Click the Bottom baking Button to set the heating mode to bottom element heating. At this time, the Bottom baking Button remains fully lit, and the Grill heating Button turns dark; Click Grill heating Button to set the heating mode to grill heating. At this time, Grill heating Button becomes fully lit and Bottom baking Button darkens. 3.
FUNCTION INSTRUCTIONS 4. HEATING STATE 1. After entering the heating state, the time in the middle of the screen begins to accumulate. The maximum heating time is 2h, and the Finger Button in bright red. If the user selects the overheating mode in the Start up State, the selected heating mode is fully bright, and the unselected heating mode buttons are dimmed.
FUNCTION INSTRUCTIONS 5. END STATE 1. After entering the End State, the Finger Button is fully white, and the screen displays "End" on the left. 2. In the End State, click the Finger Button to enter the Start up State. 3. ln the End State, long press the Finger Button for 2s to return to the Standby State. 6. LAMP SETTING 1. ln addition to the Standby state and Fault Conditions, the lamp can be turned on or off by the Lamp Button in other states.
FUNCTION INSTRUCTIONS 7. FAN SETTING 1. You can use the Fan Button to enable or disable the fan in any state except the Standby State and Fault Conditions. 2. After the Fan Button is started, the Fan Button is all on. After the fan is turned off, the Fan Button is dimmed. Note: After entering the Heating State, the fan will automatically turn on and the Fan Button will light up. When the oven reaches the set temperature, the Fan Button can control the fan to turn on or off again. 8.
FUNCTION INSTRUCTIONS 9. FAULT CONDITIONS 1. The oven malfunctions in the following cases. After a fault occurs, the oven will sound 20 fault sounds, and the corresponding fault code will be displayed in the center of the screen. 2. ln case of some failures, click the Finger Button to return to Start up State. In the case of some failures, click the Finger Button or turn the knob to return to the original state.
TROUBLESHOOTING FAULT CONDITION ERROR CODE FAULT REASON WETHER OVEN CAN RESTORE TO START UP STATE NTC open circuit EOl Open circuit or open NTC is detected X NTC short circuit E02 NTC short circuit is detected X Abnormal communication Ell Abnormal communication is detected X E14 Abnormal crystal oscillator detected Restore to original state Abnormal crystal oscillator Abnormal high temperature E15 After heating, it is detected that oven temperature exceeds 600°F for 20s 12
WE TRANSFORM A SIMPLE KITCHEN INTO A PRO ONE. THIS IS WHY WE CARE ABOUT MAKING VERY HIGH PERFORMANCE RANGES AND HOODS, TO MAKE YOU FEEL LIKE A PRO AND STYLISH COOKER. DESIGN: LONDON DC - WWW.LONDON-DC.COM FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.
