Specification

5. END STATE

1. After entering the End State, the Finger Button is fully white, and the

screen displays "End" on the left.

2. In the End State, click the Finger Button to enter the Start up State.

3. ln the End State, long press the Finger Button for 2s to return to the

Standby State.

6. LAMP SETTING

1. ln addition to the Standby state and Fault Conditions, the lamp can be

turned on or off by the Lamp Button in other states. When the lamp is

turned on, the lamp button is fully on; when the lamp is turned off, the

lamp button is dimmed.

2. With the door open, the lamp stays on. After closing the door, the

lamp will be delayed for 2 minutes to turn off. Afterwards, when the

oven door is closed, click the Lamp Button to turn on the lamp, and

then without 10 minutes operation or click the Lamp Button to turn

off the lamp.

3. After entering Standby State, the lamp will be turned off.

4. After entering the Heating State and End State, the lamp will

automatically light up for 2 minutes.

5. Hold down lamp button for 3 seconds, the long strip lamp on, hold

down lamp button 3 second again,the long strip lamp off.

FUNCTION INSTRUCTIONS