Specification

2.1. CLOCK SETTING

1. After entering the Clock Setting, the clock blinks, indicating that the

current clock can be adjusted, and the clock can be adjusted by

turning the knob. The clock is set to 12 hours.

2. After adjusting the clock, click the Finger Button or do not operate

for 5 seconds to exit the Clock Setting and return to the normal

display in the Standby State.

3. START UP STATE

1. After entering the Start up State, all buttons light up and the product

makes a "power-on tone".

2. ln the Start up State, you can set the heating mode and temperature.

If you do not operate the product for 10 minutes (when the fan is not

started) or hold down the Finger Button for 2 seconds, the product

enters the Standby State.

FUNCTION INSTRUCTIONS