Use and Care Manual

2
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE
WWW.KUCHT.COM
26
6. Lamp Setting
ln addition to the Standby state and Fault Conditions, the lamp can be turned
on or off by the Lamp Button in other states. When the lamp is turned on, the
lamp button is fully on; when the lamp is turned off, the lamp button is
dimmed.
With the door open, the lamp stays on. After closing the door, the lamp will be
delayed for 2 minutes to turn off. Afterwards, when the oven door is closed,
click the Lamp Button to turn on the lamp, and then without 10 minutes
operation or click the Lamp Button to turn off the lamp.
After entering Standby State, the lamp will be turned off.
After entering the Heating State and End State, the lamp will automatically
light up for 2 minutes.
Hold down lamp button for 3 seconds, the long strip lamp on, hold down lamp
button 3 second again,the long strip lamp off.
7. Fan Setting
You can use the Fan Button to enable or disable the fan in any state except the
Standby State and Fault Conditions.
After the Fan Button is started, the Fan Button is all on. After the fan is turned
off, the Fan Button is dimmed.
Note: After entering the Heating State, the fan will automatically turn on and
the Fan Button will light up. When the oven reaches the set temperature, the
Fan Button can control the fan to turn on or off again.
8. Door Detection
ln the Heating State, after the oven door is opened, the heating time continues
to be timed, and the lamp will always be on.
After closing the oven door, the lamp will be delayed for 2 minutes.