Instructions

12
Install the sound generator at the hold point for the exhaust silencer according to fig. 21 and orientate it
before the tightening of the fixing screw according to fig. 22.
Fig. 21 Fig. 22
Connect the external sound generator with the just routed cable, fig. 23 and 24, and attach the cable with
cable ties.
Fig. 23 Fig. 24
As additional safety the delivered steel cable and the retaining clips have to be tightened on the
Sound Booster as well as at a suitable position in the car. This safety cable is an additional
security should the tightening screws should be released by vibration.
Please use for the fixation of the Sound Booster suitable high tensile screws. In order to avoid
loosening of the screws by vibration please make the screws safe with appropriate factory
material e.g. threadlock. Please additionally check the stability of the Sound Booster regularly
and if necessary retighten the screws.
In case of no consideration we do not assume liability for possible damages.