Instructions

13
Finally, you have to route the wire of the pushbutton for the switch of the sound profiles. Use a pull
through aid for this and route the wire from the passenger’s footwell behind the center console into the
driver’s footwell, fig. 25. We recommend the installation of the pushbutton below the dashboard, at a
non-visible position, fig. 26.
Fig. 25 Fig. 26
The reassembly is made in reversed order. See to a can bus sleep mode of at least 10 minutes (lock
vehicle). Thereafter the installation is completed.
You can switch the sound profiles with the pushbutton. You can choose between 6 sound profiles. In
profile 1-3 you hear a restrained sound, in profile 4-6 it’s a powerful V6/V8 sound.
Attention: For the drilling, a 7mm drill is necessary!