Instructions

Safety Instructions

The installation may only be executed by trained qualified personnel. Please execute the installations

only in a condition of dead voltage. Here please separate for example the battery from the main power

supply and consider the instructions of the car manufacturer.

• In order to not endanger your own driving safety please never use security relevant screws, bolts

or other fixation pieces at steering, brake system or other components.

• Connect the device only at 12V wiring system voltage with ground connection to the autobody.

This assembly is not allowed for the use in trucks or other cars with 24V wiring system voltage.

• Please avoid the installation of the device at positions where the driving safety or the functional

efficiency of other subassembly integrated in the car are restricted.

• This module may only be used together with the following mentioned car types and models; the

installation may be executed exclusively by use of the circuit points mentioned in the assembly

instructions.

• Kufatec GmbH \& Co. KG does not assume liability for damages which are caused by incorrect

installation, the use of inapplicable circuit points or the installation into car types and -modules

which are not foreseen.

• We would like to draw your attention to the fact that the module processes the data of the MOST-

protocol of the car mentioned below. Therefore, during the installation of the module it will be used

a model-specific complete system which we as the manufacturer of the mentioned construction line

only know partly.

• Especially in case of changes within the same model line and the same year we therefore cannot

guarantee the applicability of our construction line in each case. Kufatec GmbH \& Co. KG does

not assume liability for the applicability of our construction line with changes made by the

manufacturer.

• Kufatec GmbH \& Co. KG does not assume liability that the installation of the here described

component has been permitted according to the guarantee instructions of particular car

manufacturers. Therefore, please consider the guidelines for installation and guarantee conditions

of your car manufacturer before installation.

• The manufacturer reserves the right to change components without giving reasons.

• Subject to errors and changes.

Requirements for the determinable operation

Please use the device only in its the corresponding area.

In case of unprofessional and untypical use, installation or modification the permission for operation and

the warranty claim will expire.