Instructions

7
Remove the carpet in the passenger’s footwell as well as the trim panel below the dashboard and of the
a-pillar at the bottom (Fig. 1). For this, it is necessary to remove the sill trim, Fig. 2.
Fig. 1 Fig. 2
Connect the Can wires with the white plug of the comfort control unit below the dashboard at the a-pillar,
fig. 3, as shown below. For this, loosen the interlock of the plug and move it off. Remove the plug
housing to be able to read the Pin numeration and establish the connections as named below, fig. 4.
Fig. 3 Fig. 4
Can High (black/white) - Pin 36 (blue/red)
Can Low (black/yellow) - Pin 35 (red)
afterwards insulate the wires with insulating tape.