Instructions

8
Connect the ground cable (brown) afterwards. A suitable ground spot is located in the passenger’s
footwell, fig. 5 and 6.
Fig. 5 Fig. 6
Connect the wire for ignition plus (red/white) with the yellow/green wire of the cable harness at the fuse
carrier in the trunk (below the covering), fig. 7. Loosen the fuse carrier to establish the connection at the
back side according to fig. 8. Insulate the connection point afterwards and protect the wire with 7,5A.
Check the correct connection to ignition plus with a voltmeter!
Fig. 7 Fig. 8