Installation Instructions Front Park Pilot (Rear Park Pilot Already Installed) v1.0 (04.11.2022) Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: info@kufatec.
Contents 1 Liability Exclusion 3 2 Copyright 4 3 General notes 4 4 Safety Instructions 5 5 Requirements for the intended use 5 6 How to connect a cable to another 6 7 Note Cable Inscription/Color 7 8 Assembly Instructions 8 9 Assembly Note 9 10 Disassembly front bumper 10 11 Disassembly wipers/engine compartment covering 11 12 Disassembly coverings front driver’s side 12 13 Cable routing to the front 14 14 Assembly front sensors 15 15 Assembly sensor holders with adhesive pads 1
8 Assembly Instructions The following illustration shows the cable routing as well as the position of the individual components. 2,3 4 1 5 1 1 4 2 1 3 1 5 Figure 3: Vehicle overview • 1 Sensors • 2 Park Pilot control unit • 3 BCM, warning buzzer • 4 Button • 5 Ground connection Please be aware that this overview is only for illustration purposes. Always lay the cable set in the most convenient and shortest way possible.
