Instruction Manual

12 Disassembly front si ll trim
1
2
3 4
Figure 5: Disassembly front sill trim
Table 3: Instructions to disassemble the front sil l t r i m
Nr. Work step Note
1 Remove the upper cover of the a-column by us in g an assembly lever.
2 Loosen t h e leve r for the hood release by pushing in the back of the latching nose .
The lever can now be lowered down by using the assembly lever.
3 Loosen the marked screw behind the lever for the hood release. 1xT25
4 Remove the sill trim includi n g the lower cover of t he A-column bv using an assembly
lever.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 11