Instruction Manual

14 Cable routing to the sound generator
1 2
2
2
3
Figure 7: Cable routing to the sound generator
Table 5: Instructions for the cable routing to the sound generat or
No. Work step Note
1 Guide the wire coming from the control unit through the marked grommet until the
wat er t an k.
2 Transfer the wire inside the engine hoo d along the spraying area downwards to the
underbody.
3 Transfer the wire along the underfloor in direction to the rear gear box bracket an d
fix the wire at suitable positions.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 13