Instruction Manual

16 Softwa re
1
Figure 9: Software
Table 7: Notes for the software
No. Work step Note
1 If the system does not work after the installat i on, please check if the system
was installed correctly by having a look on the following link: https://www.
sound-booster.com/en/debugging.html. Our Sound Booster Software for PC /
Mac should be used for the commissioning or further debugging:
Step 1: Download the appropriate software via the following link: https://www.
sound-booster.com.
Step 2: Turn the ignition of the vehicle on and only then connect the PC / Mac
with a USB-cable to our module. It is important to check beforehand if plus and
minus are connected cor r ect l y. If this is not the c ase, it could result in a damage to
the computer or to the control unit.
Step 3: Start the downloaded software and click on search first and t he n on connect.
You will be automatically f orwarded to the diagnosis site, on which you can see the
following things at a glance:
Software: Software ver si on / creati on dat e
Active profile: The actually activated profile is indicated here.
Vehicle: The automatically identified vehicle is indicated here.
System s tatu s : Here you can tell, if the connections are correct.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 15