Installation Instructions Side assist incl. parking assistant as of model year 2020 v1.1 (20.05.2022) Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: info@kufatec.
Contents 1 Liability Exclusion 3 2 Copyright 4 3 General notes 4 4 Safety Instructions 5 5 Requirements for the intended use 5 6 How to connect a cable to another 6 7 Note Cable Inscription/Color 7 8 Assembly Instructions 8 9 Assembly Note 9 10 Disassembly covering driver’s side 10 11 Disassembly sill trim driver’s side front 11 12 Disassembly coverings passenger’s side 12 13 Disassembly rear bumper 14 14 Assembly sensors 15 15 Cable routing trunk / connection ground 16 16 Cabl
8 Assembly Instructions The following illustration shows the cable routing as well as the position of the individual components. 4 2 3,5 1 3,4 2 1 5 1 3,4 Figure 3: Vehicle overview • 1 Sensor • 2 Connection ground • 3 Door coupling point • 4 Warning light • 5 Connection power supply / CAN bus Please be aware that this overview is only for illustration purposes. Always lay the cable set in the most convenient and shortest way possible.
