! " # " www.kufatec.de Kufatec GmbH & Co. KG • Dahlienstr. 15 • 23795 Bad Segeberg • e-mail: info@kufatec.
General advice ........................................................................................................................................... 1 Safety Instructions ...................................................................................................................................... 2 References of legal regulations for operation ............................................................................................. 2 Needed Hardware/ Software ..............................
& # Installation requires special knowledge. Do not install the unit yourself. For safe and reliable installation, consult a dealer having special knowledge. • Never use bolts or nuts from the car’s safety devices for installation. If bolts or nuts from the steering wheel ,brakes or other safety devices are used for installation of the unit, it may cause an accident. •Use the unit with a DC 12V negative ground car. This unit cannot be used in large trucks which use a DC 24V battery.
) • • • • * Bluetooth notebook (Bluetooth adapter) Bluetooth mobile phone Compatibel with Windows Vista, XP Data compression software WinZip Fig. 1 Note: Once the update has started, it may not be interrupted under any circumstances. This will cause damages of the FISCON software. # #! Depending on the hardware version the FISCON system needs to have different update software. Hardware version 1 Hardware version 2 Hardware version 2 Fig.
) % Hardwareversion 1 Download the latest firmware update from the Kufatec web-site and extract it to a folder on your notebook using WinZip (Fig 3). Fig. 3 After the file as been extracted start the “BT_Updater” program (Fig 2). Fig. 4 Follow the installation wizard (Fig 5). Select a path for the software to be installed in. After successful installation close the installation wizard (Fig 6). Fig. 5 Fig.
) % + Hardwareversion 2 Download the latest firmware update from the Kufatec web-site and extract it to a folder on your notebook using WinZip (Fig 7). Fig. 7 After the file as been extracted start the „Setup-OEM“ program (Fig. 8). Fig. 8 Follow the installation wizard (Fig. 9). Select a path for the software to be installed in (Fig 10). Fig. 9 Fig.
After successful installation close the installation wizard (Fig 12). Fig. 11 Fig. 12 # Pair up your Bluetooth mobile telephone to the FISCON (e.g. RNS-E Fig 13). Fig. 13 Vehicle Head unit Audi RNS-E, BNS 5.0 Concert (A4 8K, A5, Q5 8R) Symphony (A4 8K, A5, Q5 8R) Media System 1.0 Navigation 6.5“ Seat Turn the dial and spell out the following text: „#582*7873283#„ and then hit the Select key (Fig 14). Fig.
Once the Select key has been pressed the FISCON unit will be in Update mode (Fig15). Fig. 15 ! ""# $ Turn the dial and spell out the following text: „#582*7873283#„ and then hit the dial key (Fig 16). Once the Select key has been pressed the FISCON unit will be in Update mode (Fig 17). Fig. 16 ! %& Fig. 17 ' The menu SW-Update has to be selected by using the FISCON telephone menu within the driver information system. Fig. 18 Note: Step to the menu SW UPDATE.
! " Turn the dial and spell out the following text: „258222025„and then hit the dial key (Fig 19). Once the Select key has been pressed the FISCON unit will be in Update mode. Fig. 19 Fig. 20 The connection between your mobile telephone and the FISCON will be canceled automatically. All of your previous profiles will be lost upon completion. ! "& Turn the dial and spell out the following text: „258222025„and then hit the dial key.
. / 01& 2 3 Select “Parrot Flash Update Wizard” from the start menu (Fig 23). ). Select “Next“ (Fig 24). Fig. 23 Fig. 24 Select CK505X and then hit “NEXT” (Fig. 25) Fig. 25 / 01& 2 3 Select “Bluetooth Software Update Tool” from the start menu. Select “Next“ (Fig 26, 27). Fig. 26 Fig.
Select „TYPE-D“ und hit „NEXT“ (Fig. 28). Select CK505P and then hit “NEXT” (Fig 29). Fig. 28 4 Fig. 29 % Select “Browse” and select the navigate to where you have the firmware update stored (Fig 30). Fig. 30 5 Select the Update method “Bluetooth Connection” (Fig 31) and then select “Next”. Fig.
Select “Search Devices” (Fig 32). Fig. 32 Select the “CK5050” and then select “Next” (Fig 33) . Fig. 33 6 Enter the PIN “1234” and the update process will begin (Fig 34). Fig.
Please wait for the installation to finish (Fig 35). When the software installation is finished please select “Finished” (Fig 36). Fig. 35 Fig. 36 After completion of the update the FISCON software is automatically re-started. Your navigation screen will look like Fig. 37 (e.g. Audi MMI 2G) on the telephone page. As soon as the Bluetooth connection has been established, the FISCON unit is ready for use. Fig.
