Instruction Manual

2
&#
Installation requires special knowledge.
Do not install the unit yourself. For safe and reliable installation, consult a dealer having special
knowledge.
• Never use bolts or nuts from the car’s safety devices for installation. If bolts or nuts from the
steering wheel ,brakes or other safety devices are used for installation of the unit, it may cause an
accident.
• Use the unit with a DC 12V negative ground car. This unit cannot be used in large trucks which
use a DC 24V battery. If it is used with a DC 24V battery, it may cause a fire or accident.
• Avoid installing the unit in following places: - Where it would hinder your safe driving. - Where it
could damage the car’s fittings.
• This unit is only for use in the following vehicles. Only connections described within this
instruction guide are allowed or required to use for installation.
• For damage impact caused by faulty installation, unsuitable connections inappropriate vehicles
Kufatec GmbH assumes no liability.
• We advise you that these units process datas out of the MOST - protocol from the vehicle. As
the supplier of this device we don‘t know the overall system you are working with. If our device
causes damage due to other changes made by to the vehicle Kufatec GmbH assumes no liability.
• Kufatec GmbH supplier do not guaranty the use of the product for changing’s within a new
vehicle series.
• If the car manufacturer’s don‘t agree with the installation of our device by reason of warranty the
Kufatec GmbH assumes no liability. Please check conditions and warranty before you begin the
installation.
• Kufatec GmbH supplier reserves the right to change the device specifications without notice.
• Errors and changes excepted.
'#((
Only use this unit in the intended domain.
If you use it in a foreign domain, if the unit is not installed properly, or if the unit will be reconstructed, the
guarantee will expire.