Instruction Manual

6 How t o connect a cable to anot her
1 2
3 4
5 6
Figure 1: How to connect a cable to another
Table 1: How to connect a cable to another
No. Work step Note
1 Take the cable of the vehicle, t o which you want to connect, (green marked here) and
strip the insulation at one point with a suitable tool (c abl e str i pper/cutter knife).
2 Now take the cable of the cable set, which you want to connect, (yellow marked
here) and strip the insulation at the end.
3 Twirl the wires of the stripped cable together.
4 Place the end of the cable you want to connect under the stripped poi nt of the cable
of the vehicle...
5 ... and wrap the cable you want to connect around the cable of the vehicle. Solder
the connection professionally.
6 Lastly, stick insulating tape around th e connection poi nt. Make sure that t he isola-
tion is put onto the connection professionally to prevent corrosion.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 6