Phau Ntawv Qhia

9
Now uncover the back side of the fuse box and solder the wire of the cable set for the ignition plus
(red/white) to the thick black/yellow wire Figure 7
Figure 7
Connect the ground cable (brown). A suitable ground spot is located at the footwell area on the driver’s
side, near the A-column, Figure 8.
Figure 8
Now lay the wire of the cable set with the push button for the switching of the sound profiles in the
vehicle interior and fasten the push button in an optional assembly spot.
Recommend assembly spots: covering dashboard driver’s foot space, centre console etc.